If you use hydraulic hoses on a daily basis, you want to ensure these hoses are as safe and protected as possible. The better treatment your hoses receive, the longer they last and the less money you have to spend. Here are five tips to keep in mind when it comes to protecting your hoses from damage:

1. Choose your hoses carefully

As you know, you cannot just use any hose for any application. When you are purchasing your hydraulic hoses, make sure you choose hoses that have the right diameter and length to handle the job at hand. Also, pay attention to ensure the hoses are compatible with your pressure and temperature requirements. If they are not, they may break just by using them, damaging not all the hose but potentially injuring your employees as well.

2. Always use compatible parts

Obviously, the hose is just one part of the assembly. Once you choose your hoses, make sure you also choose the coupling, crimpers and other accessories carefully. All of your parts should be compatible to ensure they work together as designed and intended.

3. Avoid friction and twisting

As your hydraulic hoses are being used all day long, they may get twisted, they may rub against metal parts of your machinery or they may be subjected to a range of other abrasions or strains.

Avoid these potential injuries by adhering to a strict hydraulic hose protocol. Always have your workers pick up the hose when it is not in use so it doesn’t get run over or stepped on.

When the hose is being used, take care to ensure it is stretched straight and carefully, and monitor its position to avoid friction. If possible, look for hydraulic hoses with abrasion resistant coating or purchase a guard or sleeve for extra protection.

4. Protect your hoses with guards or sleeves

Whether you use your hoses inside or outside, you can give them an extra layer of protection with guards and sleeves made just for hydraulic hoses.

You can buy guards that prevent hoses from twisting, and you can also find guards that cover exposed hoses from the elements or ones that stop internal hoses from being exposed to abrasion within machinery. Buying guards also makes it easier for your employees as they don’t constantly have to be looking out for the hoses and ensuring they are in a safe position.

5. Keep hoses protected from the elements

Not every injury threatening your hose is related to friction or twisting. Hoses can also be worn down by the elements. If possible, avoid storing your hoses outside, and if they are used in an application where they must be stored outside, cover them with a tarp to protect them from the sun, rain and wind when not in use.

For tips, supplies or assistance, consult companies like Hose Mania.